Process

Our meticulous service process is designed to provide optimal care for your vehicle’s undercarriage, ensuring its longevity and performance.

1) Comprehensive Assessment:

Our journey begins with a thorough assessment of your undercarriage. We meticulously inspect, identifying areas affected by rust and gauging the extent of damage. Our inspection service takes about ½ hour. We put your vehicle on the hoist, inspect it, and demonstrate the laser technology. 

2) Preparation Phase:

Before the laser, we wire-brush or needle-scrape rusted surfaces. This step eliminates scale and loose debris and creates a foundation for the laser rust removal. 

3) Rust removal Precision:

Armed with a state-of-the-art continuous 2000W laser technology, we remove rust. We remove accessible rust from the frame, subframe, and suspension. Our technicians carefully target and eliminate all accessible rust. Laser vaporizes rust, dirt, and oil, leaving a clean, porous, moisture-free surface for Clova Mastic 8311 2-part epoxy to adhere to. Note: The laser will not damage rubber bushings, wires, or brake/gas lines. The laser passes over these without prolonged contact.

4) Application of industrial coating:

We apply two special industrial rust coatings: a base coat of Clova Mastic Epoxy 8311 and a top coat of Armor Shield Enamel 835. These are the best industrial rust coatings on the market.

5) Application of Base Coat:

Cloverdale Paint’s “Clova Mastic Epoxy 8311” is a true two-component epoxy mastic specifically designed for corrosion protection on steel. An undercarriage is subject to stone chips/abrasion, road salt, fuel/oil/grease exposure, flexing, and vibration. With Clova mastic, we achieve excellent resistance to rust, corrosion, adhesion, and flexing, plus high-build properties to seal pitted rust. We apply laser processing and coatings only to rusted surfaces. Preventative coatings, e.g., front-facing frame and subframe members, can be applied at an extra cost.

6) Application of Top Coat:

Cloverdale Paint’s “Armor Shield 835 DTM Polyurethane Enamel” is a two-component, approved, industrial-compatible top coat applied over Clova mastic 8311 epoxy for additional rust and corrosion protection. Provides excellent resistance to corrosion, abrasion, and impact. Some spots are inaccessible via the laser or base/top coats. In these areas, we apply touch-ups using a spray can of Tremclad Automotive Pro – gloss black.

7) Quality Assurance:

In a critical phase, we perform an exhaustive quality check. This involves a detailed examination of the treated areas to verify the effectiveness of the laser and industrial coatings.

8) Customer Inspection:

We encourage involvement in our process. We employ four tools here. One: the inspection with you before work starts. Two: progress photos via texting. Three: a final inspection with you of completed work. Four: a gallery of photos on a thumb drive, showing before, after laser, after industrial coating, and after top coat.

9) Our commitment:

At Laser Rust Removal, our commitment to excellence drives every step of our process. From assessment to application, our systematic approach ensures your vehicle’s undercarriage is fortified against rust and ready to withstand the elements and the road ahead. We need your vehicle for 2-3 days to complete the service.